To work properly, the two rails should not contact each other and no metal object should contact both rails together.

This would cause a short circuit, which could damage your model train power pack if it happened too often.

With this in mind, assemble your model train track and connect the power pack . . . and you’ll be ready to start operating your model trains.

It is as easy as plugging in the power pack, carefully placing the locomotive on the train track, turning up the throttle . . . and enjoying!

More About Model Train Tracks

It’s best to set up your train track on a sheet of plywood, a tabletop, or other hard surface. Carpet fuzz and floor dirt can hamper smooth train operation.

Model train track comes in different types made of brass, zinc-coated steel, nickel silver and steel. Regardless of what the train tracks are made of, most track sets come with a terminal section so that you can hook into the transformer.

Brass track and zinc-coated steel track are common in starter sets and, when purchased separately, are usually cheaper in price than nickel silver tracks.

Related Articles:

1. Is it Wrong to Mix Types of Track on Your Model Railroad Layout?
2. How Model Train Locomotives Work
3. Model Train Tips To Help Keep Your Dream Railway Right On Track

One option is to simply store excess rolling stock and locomotives in boxes or on display shelves or cabinets.

It is possible, however, to store all of your extra equipment and trains on tracks in a yard that may or may not be part of the visible operating portion of your model train layout.

However, design mistakes are a common feature of model railroad yard layouts. Yards don’t always work out as well as they should.

A major cause is the lack of available information on how to design a good model railroad yard layout. Without the resources, model railroaders are forced into a lot of guesswork.

Model Train Yard Layout Compression

Apart from the lack of available information on model railroad yards, another cause for less than satisfactory model railroad yard designs, is the need to compress a model railroad layout into the space available. ‘Compression’ is the model railroaders enemy, but in most cases, necessary.

Let’s start by looking at the make up of real classification yards. Generally, they are huge. They often consist of many smaller special-purpose rail yards, that collectively, add up to a complex array of train track.

It is commonplace for there to be three separate double-ended rail yards strung one after the other. These are designed to move train traffic efficiently and usually comprise: an arrival yard, a classification yard, and a departure yard.

The Arrival Yard On Model Train Layouts

The arrival yard is where arriving trains drop off the cars of their train. The cars are then moved to the classification yard, being switched back and forth as necessary to get the right cars onto the right trains.

The trains are then built out and moved to the departure yard. After getting a new caboose and locomotive, they then proceed to their next destination.

Related Articles:

1. How Model Train Locomotives Work
2. Why Build A Branch Line Model Train Layout?
3. Planning A Small Model Train Layout