Model Train Tips Articles

About Model Train Tips

I am a complete model railroading novice, and I’ve started this website to share what I learn with others who are also new to the hobby and want to learn about it. I invite you to sign up for my newsletter and get the free report: 7 Model Train Mistakes To Avoid.

Columbia River Gorge Railroad Pictures

Columbia River Gorge

In a recent article, I asked which railroad you model on your layout. One of the areas I mentioned that I would like to model was the Columbia River Gorge area that separates Washington and Oregon. I recently had the opportunity to travel through that area and took some pictures to share with you here. There are rail lines on both sides of the river and run parallel to the highways on the Washington and Oregon sides of the river. I was travelling on the Oregon side on U.S. Interstate 84 headed east towards The Dalles. These two pictures show the trains on the Oregon side right next … [Read more...]

Dance Hall Added to The C & G RR Layout

Paradise Cove Dance Hall

Chuck Shutz has added a dance hall with an outdoor eating area to his layout. Now his layout has a busy nightlife, complete with a band and lively dancers on the dance floor. This HO scale layout by Chuck Shutz of West Palm Beach, Florida, is a very small and simple oval layout with intense and intricate scenery. The layout is only 44″ by 66″, but it has as much detail as some larger layouts. Chuck’s small layout models a riverside resort set in the 1950′s complete with a picnic area, a playground with kids frolicking, a foot bridge, a backyard BBQ, and kids fishing from a … [Read more...]

Airbrushing Tips to Weather Your Model Railroad

Badger Air Brush Kit

Weathering with an air brush is easy to do and gives excellent results. Start with darker colors and add lighter colors on top. Line up all your cars, structures and loco’s and treat them assembly line style, then change colors and do it again and again. Remember, weathering is a matter of degree and most rolling stock is fairly clean. The disadvantage of weathering with paint is that it is pretty permanent when you are done. Mac McCalla shared this tip for airbrushing: I have been weathering with an airbrush for many years and have done many clinics for Badger Airbrush and at … [Read more...]

Painting and Weathering Using Common Household Items

Details

Always on the lookout for cost effective ways to enhance their model railroad layouts, modelers continue to come up with unique methods for weathering. Painting Here’s a tip where Palmer Schatell describes one way he paints some components of his layout: When airbrushing HO [cars & engines], with a little hand molding, the soft cardboard rolls that toilet paper comes on fits into the cars and locomotive bodies and provides a way of holding these objects. I used the cap from a spray can fastened to the center of an inexpensive Lazy Susan to allow me to turn the bodies without having … [Read more...]

Model Railroad Weathering with Eye Shadow and Chalk

180 Color Eye Shadow Kit

Model railroaders are continually coming up with creative and unique methods for giving their model railroad layouts a realistic weathered look. Here are a couple of tips for using eye shadow and pastel chalk. Eye Shadow Aaron Savoian shared this tip about using eye shadow for an interesting weathering technique for your model railroad: I have found that women’s eye shadow works well when wanting to blend colors on plaster castings. The eye shadow doesn’t need to be sprayed to adhere to the plaster and is easy to work with (no messy dust). I usually apply a slate colored eye shadow … [Read more...]

Weathering Roads, Paint and Rust on Your Model Railroad Layout

Weathering Roads

Peter Plantec shared this tip about weathering roads, paint and rust on your model railroad layout: There are several brands of alcohol based asphalt patch material used to mend roofs and gutters. I found that I could dilute and pour it in a form made of strip wood to make a road bed. Before it completely hardens you can rub in some talc and cut in cracks and divisions. You can even carve scale bricks as the underlying old road bed. The surface looks remarkably real. Also, I almost never paint anything. I gesso it and then add layers of alcohol stain (used for shoes.) I usually … [Read more...]

Extreme Weathering for Your Model Railroad Cars

Weathered Boxcar

Pepper Kay shared this tip about extreme weathering for your model railroad rolling stock: Weather as you normally would your next box car, tank, hopper, etc. then, spray two coats of Dullcote on your finished car. When that has dried thoroughly, use your pump sprayer filled with 93% rubbing alcohol and give a good, wet coat to your finished car. The alcohol reacts with the Dullcote and makes the most faded, weathered finish you’ve ever seen. Careful, don’t do but just a few cars as the effect goes a long way. -Pepper Kay Note: I have not tried this tip yet but I would … [Read more...]

Tips for Adding Graffiti to Your Model Railroad Scenery

Train Graffiti

We’ve all seen graffiti on trains. What would a realistic model railroad layout be without graffiti on some of the rolling stock? Here are some tips from other modelers for adding graffiti to your model railroad layout scenery and rolling stock: You know, I realized a great way to make graffiti without buying those expensive decals. I use White-out (a correction pen), the finer the tip the better. I even made up a cool scene with this- I painted an HO car, parked it in front of a university, and put an angry teacher beside it, like one of his students painted it! -asparuh frangov … [Read more...]

Realistic Weathering for Roofs on Your Model Railroad Layout

Weathered Metal Roof

Bob and Nick Lloyd wrote in and shared this tip for realistic weathering of the roofs of buildings on their layout. Okay, so my Dad and I are starting to build a platform for our HO scale trains. We are starting off with a platform upstairs, but after the holidays we are moving it down to our basement where we are going to build a permanent one. Recently we have been going through the process of taking all of our old plastic buildings and making them look more realistic by dulling them and putting on new roofs. Yesterday my dad decided to wrap the roof of our mill in tin foil and soak … [Read more...]

Which Railroad Do You Model on Your Layout?

Burlington Northern 766 EMD F9

It might be interesting to hear from some of your subscribers what railroads they favor for their layouts. This question was posted in response to the article about choosing a railroad to model. What a great question, I thought. It got me to thinking; why don’t I ask you which railroad you model on your layout. I’ll start this off by talking about two railroads I would like to model: Burlington Northern and the Atchison, Topeka and Santa Fe. I don’t mean the single combined Burlington Northern and Sante Fe Railroad as it is today, but the separate railroads as they were in the … [Read more...]